SNi40

1 Serial port for access in console mode

2 USB 2.0 port of USB drive.

 

The serial port makes it possible to access the appliance in console mode: so it is possible to log on to the SNi40 directly using a PC.

With the SNi40 powered off:

  1. Insert the USB drive into the USB 3 port.
  2. Connect the serial port 1 to an RS232 serial port on the PC using the serial cable provided with the SNi40.
  3. Launch a console emulator on the PC to access the SNi40.
  4. Power up the SNi40, which will immediately start running on the USB drive.