Data reported through the telemetry feature.

This section lists the telemetry probes that are enabled on the firewall when the Allow usage data to be sent to Stormshield (anonymous) checkbox, which is found in the General configuration tab in System > Configuration, has been selected.

  • Number of lines generated in each log file ,
  • Size of each log file ,
  • CPU consumption ,
  • Memory use ,
  • Number of connections managed by the proxy, by protocol ,
  • Number of degraded connections managed by the proxy, by protocol ,
  • Maximum number of simultaneous connections managed by the proxy, by protocol ,
  • Maximum number of simultaneous degraded connections managed by the proxy, by protocol ,
  • Number of objects in the object database, by type ,
  • Number of filter and NAT rules ,
  • Number of simultaneous connections through the firewall ,
  • Number of hosts known to the firewall ,
  • Number of authentications by type ,
  • Number of antivirus scans performed ,
  • Number of users connected for each authentication method ,
  • Number of TS agents connected ,
  • Statistics on memory consumption by sockets,
  • Log partition usage information ,
  • Statistics on memory and CPU consumption by daemons ,
  • Information on whether the TPM is used ,
  • Statistics on the PKI (number of CAs, certificates and identities protected by the TPM),
  • Number of URLs matching the "Compromised URLs" category ,
  • Information on whether the Extended Web Control (EWC) URL classification solution is used ,
  • Number of URL classification requests ,
  • Number of site-to-site IPsec tunnels configured and enabled in the active IPsec policy ,
  • Maximum number of site-to-site IPsec tunnels set up ,
  • Number of mobile IPsec tunnels configured and enabled in the active IPsec policy ,
  • Maximum number of mobile IPsec tunnels set up ,
  • Number of IKE v1 IPsec tunnels configured in the active IPsec policy ,
  • Number of IKE v2 IPsec tunnels configured in the active IPsec policy ,
  • Number of IPsec tunnels with pre-shared key authentication configured in the active IPsec policy ,
  • Number of IPsec tunnels with certificate authentication configured in the active IPsec policy ,
  • Number of IPsec tunnels with certificate and XAUTH authentication configured in the active IPsec policy ,
  • Number of IPsec tunnels with EAP-GTC authentication configured in the active IPsec policy ,
  • Number of IPsec tunnels with certificate and EAP-GTC authentication configured in the active IPsec policy ,
  • Number of entries in the TLS 1.3 cache,
  • Number of entries with a timeout error in the TLS 1.3 cache,
  • Number of times the TLS 1.3 cache was purged after being filled up ,
  • Number of stop signals indicating that a process ended abnormally ,
  • Date of the last stop signal indicating that a process ended abnormally ,
  • SDD status data (number of hours powered up, wear rate, percentage of remaining life ,
  • Number of filter policy reloads since firewall startup ,
  • Status of asynchronous filter rule reloading mode ,
  • Number of mobile IPsec tunnels configured with a Key-Encapsulation mechanism (KEM) using an algorithm that is resistant to post-quantum attacks ,
  • Number of site-to-site IPsec tunnels configured with a KEM using an algorithm that is resistant to post-quantum attacks ,
  • Number of mobile IPsec tunnels set up with a KEM using an algorithm that is resistant to post-quantum attacks ,
  • Number of site-to-site IPsec tunnels set up with a KEM using an algorithm that is resistant to post-quantum attacks ,
  • Number of GET requests on the REST API ,
  • Number of PUT/POST/DELETE requests on the REST API ,
  • Overall number of router objects and number of router objects configured with SLA criteria ,
  • Number of blocks removed from SSD use due to programming or erasing failure ,
  • Number of hours SSD has been powered up ,
  • Average number of SSD block erasures ,
  • Percentage of remaining SSD lifetime ,
  • SSD wear indicator (0 - 100%) ,
  • Total number of 512 byte sectors written throughout the lifetime of the SSD ,
  • Total number of 512 byte sectors read throughout the lifetime of the SSD ,
  • Status of web service updates in automatic mode (enabled/disabled) ,
  • Number of route-based tunnels (VTI) configured ,
  • Number of route-based tunnels (VTI) configured with a KEM using an algorithm that is resistant to post-quantum attacks ,
  • Number of route-based tunnels (VTI) set up ,
  • Number of route-based tunnels (VTI) set up with a KEM using an algorithm that is resistant to post-quantum attacks ,
  • Number of mobile tunnels configured with EAP-TLS authentication ,
  • Number of mobile tunnels configured with multi-certificate authentication (host and user - RFC4739).