Enabling asynchronous mode

Before activating this feature, we recommend customizing the idle timeout for TCP/UDP connections, in order to monitor the persistence of asynchronous connections.

To do so, go to the section Monitoring the persistence of asynchronous connections in this technical note.

 

From the CLI console (Configuration > System > CLI Console):

1. Enable asynchronous mode by running the following command:

   CONFIG SECURITYINSPECTION COMMON STATEFUL AsyncReload=1

2. Apply the configuration by running the following command:

   CONFIG SECURITYINSPECTION ACTIVATE

These commands are explained in detail in the CONFIG SECURITYINSPECTION menu of the CLI SERVERD Commands Reference Guide.