Action required: Apply the fix for SNS firewall disks.
Please follow the procedure described in the How to update my SSD Firmware - Stormshield Knowledge Base article (authentication required).
Selecting a profile
These application profiles contain the configuration of the protocol scan, which is capable of raising alarms. An inspection profile is made up of a set of application profiles per protocol. By default, the inspection profile IPS_00 contains the application profiles protocole_00, and so on. These are the inspection profiles that will be applied in the filter policy.
For information, in factory configuration the inspection profile IPS_00 is intended for internal interfaces, applied to incoming traffic. The profile meant for public interfaces applied to outgoing traffic is the profile IPS_01.
The drop-down list offers 10 profiles, numbered from 00 to 09.
Each profile has by default the name of the protocol, accompanied by its number.
- (1) http_01…
|Edit||This function allows performing 3 operations on profiles:
|Last modification||This icon allows finding out the exact date and time of the last modification. If the selected profile has comments, they will be displayed in the tooltip.|
|Go to global configuration||This option contains the list of default TCP ports. This option is accessible in each protocol except: IP, ICMP, RTP, RTCP.
You can Add or Delete ports by clicking on the respective buttons.
Please refer to the following section to find out which settings are offered in the global configuration.