SN1100

Enabling password protection of the UEFI control panel

  1. Plug a monitor and USB keyboard into the SNS firewall.

  2. Restart the SNS firewall.

  3. When the Stormshield logo appears, immediately press [Del] several times to stop the SNS firewall startup sequence.
    This will lead you to the UEFI control panel.

  4. Go to the Security tab by using the arrow keys.

  5. Select Setup Administrator Password and press [Enter].

  6. In the Create New Password window, enter a password of your choice and press [Enter].

  7. In the Confirm New Password window, confirm the password and press [Enter].

  1. Press [Esc] and go to the Save & Exit tab.

  2. Select Save Changes and Reset and press [Enter].

  3. In the Save & Reset window, select Yes then press [Enter].

IMPORTANT
Reminder: the password you set must be kept in a safe and secure location.

Disabling password protection of the UEFI control panel

  1. Plug a monitor and USB keyboard into the SNS firewall.

  2. Restart the SNS firewall.

  3. When the Stormshield logo appears, immediately press [Del] several times to stop the SNS firewall startup sequence.

  4. Enter the password to access the UEFI control panel.

  5. Go to the Security tab by using the arrow keys.

  6. Select Setup Administrator Password and press [Enter].

  7. In the Create New Password window, leave the field empty and press [Enter].

  8. In the WARNING window, select Yes then press [Enter].

  1. Press [Esc] and go to the Save & Exit tab.

  2. Select Save Changes and Reset and press [Enter].

  3. In the Save & Reset window, select Yes then press [Enter].