SN1100
On this product, data is stored on an internal SSD.
Dismantling
- Unscrew the 13 black countersunk screws of the upper cover with a Philips screwdriver.
- Remove the cover by sliding it backwards.
This operation will tear the warranty sticker.
- Locate the SSD.
- Remove the adhesive strip from the SSD.
- Unplug the SATA connector.
- Using the Phillips screwdriver, unscrew the 4 fastening screws from the SSD support.
- Remove the SSD & support setup.
- Unscrew the 4 lateral screws of the SSD with a Philips screwdriver.
- Take out the SSD.
- Extract the TPM (Trusted Platform Module) by pulling it gently and perpendicular to the motherboard:
Assembly
- Put the support back on its 4 spacers.
- Fasten the support with the 4 screws, by using one of them to fasten the free ring terminal of the cable connecting the support + SSD setup to the chassis.
- Ensure that the 4 lateral fastening screws of the SSD remain outside the chassis.
- Put the cover back in place.
- Close the cover using the 13 screws.