Creating the traffic shaper for the DMZ interface

IMPORTANT
QoS cannot be implemented on traffic shapers with bandwidth higher than 1 Gbit/s.

Go to Security policy > Quality of service > Traffic shaper tab:

1. Click on Add.
2. Name the traffic shaper (TS_DMZ in this example).
3. In the Outgoing bandwidth column, enter the value corresponding to 90% of the bandwidth on the link attached to the DMZ in (900 [Mbit/s] in this example).
4. In the Unit column, indicate the bandwidth unit (Mbit/s in this example).
5. In the Incoming bandwidth column, enter the value corresponding to 90% of the bandwidth on the link attached to the DMZ in (900 [Mbit/s] in this example).
6. In the Unit column, indicate the bandwidth unit (Mbit/s in this example).
7. Confirm the creation of the traffic shaper by clicking on Apply.
8. Confirm by clicking on Apply.

The grid of the traffic shapers set in this example will therefore look like this: