1 |
SSD racks for log storage (2 SSD in RAID1 1 and hot-swappable). The LEDs on racks confirm that installation (green LED at the top) and access (yellow LED at the bottom) have been successful. |
2 |
The Reset button: electrically resets the firewall. |
3 |
Two USB 3.0 ports that can be used for secure configurations or upgrades. You may also plug in a USB key, USB keyboard or approved USB modem. |
4 |
MGMT1 and MGMT2: two SFP+ sockets, allowing the insertion of SFP+ transceivers, provided as an option. Both of these ports are dedicated to the management of the appliance or the configuration of high availability. |
5 |
The IPMI network port dedicated to the administration of the appliance via IPMI. Refer to the appendix Configuration and administration via IPMI. |
6 |
The serial port enables access to the product in console mode; the user can connect to the firewall directly from a computer. The default baud rate on this model is 115 200 baud (8N1). |