Connecting to the mains

The supported voltage ranges from 100V to 240V.

NOTE
You are strongly advised to connect all appliances to a UPS device. As SN-M-Series-520, SN-M-Series-720, SN-M-Series-920, SN3100, SN-L-Series-2200, SN-L-Series-3200, SN6100, SN-XL-Series-5200 and SN-XL-Series-6200 models are equipped with redundant power supplies (option offered on SN-S-Series-220, SN-S-Series-320, SN1100 and SN2100 models), plugging them into two separate mains circuits is recommended.

NOTE
In the event of an accidental power cut, the product will automatically start up once it is powered up again.

NOTE
For SN1100, SN2100, SN3100, SN-L-Series-2200, SN-L-Series-3200, SN6100, SN-XL-Series-5200 and SN-XL-Series-6200 models, -48VDC power supply modules may be provided separately upon request.

For SN160, SN160W, SN210, SN210W, SN310, SN-XS-Series-170, SN-S-Series-220, SN-S-Series-320 and SNi10 models, insert or screw the connector of the power adapter into the power socket on the rear panel of the firewall. Next, connect the adapter to an appropriate mains socket using the power cord provided.

For SN510, SN710, SN910 and SN1100 models, insert the plug of the power cord (provided with the product) into the power socket on the rear panel of the appliance. Next, plug the other end of the power cord into an appropriate mains socket.

For SN-M-Series-520, SN-M-Series-720, SN-M-Series-920, SN3100, SN-L-Series-2200, SN-L-Series-3200, SN6100, SN-XL-Series-5200 and SN-XL-Series-6200 models, insert the plugs of both power cords provided into both power sockets located on the rear panel of the appliance.
Next, plug in the other ends of the power cords into appropriate mains sockets.