CONFIG HA SHOW

Level

base

Description

Display firewall HA configuration

Returns

[Global]
State=0|1 : Is HA activated?
Initialized=0|1 : HA initialization
SendARP=0|1 : SendARP state
SendARPPeriod=<sec> : delay (sec) between 2 ARPs
Secure=0|1 : Crypto state on the HA link
InterfacesFlipFlop=<0-20000> : How long, in milliseconds, non-HA interfaces must go down when the firewall becomes passive (0=disabled)
LACPWhenPassive=1 : Maintain LACP negotiations while being passive
DelayConnUpd=10 : Connections living less than this value (in seconds) won't be synchronized
LACPMembersHaveWeight=1 : Include LACP members in quality computation
FailoverMembersHaveWeight=1 : Include Failover members in quality computation
BroadcastMembersHaveWeight=1 : Include Broadcast members in quality computation
Unicast=0 : Tells whether Unicast should be used instead of Multicast
SynchronizeMacAddress=1 : Tells whether mac addresses should be kept synchronised between the peers

[Communication]
ifname=<interf> : HA interface
ifname2=<interf> : HA backup interface

[ICMP]
NbPing=(0-300) : Number of death confirmation pings
[Corosync]
TokenTimeout=2000 : Timeout for peer loss detection by Corosync (in milliseconds)
MulticastAddr=226.94.1.1 : Multicast address used for Corosync communication between firewalls

Example

CONFIG HA SHOW