CONFIG AUTH AGENT

Level

user,modify

History

Appears in 9.1.0
SyslogState appears in 3.10.0
SyslogAddr appears in 3.10.0
SyslogPort appears in 3.10.0
SyslogAddrPattern appears in 3.10.0
SyslogUserPattern appears in 3.10.0
SyslogMsgPattern appears in 3.10.0
SyslogBackupAddr appears in 4.1.0

Description

Configure the authentication agent.
Issue an error if state is activated but no agent ip/password or controller is defined.
The domainName parameter sets an optional filter on received logon events. If a domain is provided, only users on this domain are logged in.

Remark

Remember to activate the configuration.

Usage

slot=<0-4>
[State=<on|off>]
[Mscontroller=<host,host,host>]
[MaxLogonTime=<seconds (60-86400)>]
[GroupRefresh=<seconds (0=disable 120-2592000)>]
[Probe=<on|off>]
[ProbeMethod=<ping|registery>]
[ProbeTimeout=<seconds (60-3600)>]
[agentAddr=<object>]
[agentPort=<object>]
[agentPassword=<password>]
[backupAddr=<object>]
[backupPort=<object>]
[backupPassword=<password>]
[domainName=<NetBIOS Domain>]
[DnsEnabled=<on|off>]
[NetbiosName=<NetBIOS Name>]
[SyslogState=<on|off>]
[SyslogAddr=<object|any>]
[SyslogPort=<object>]
[SyslogBackupAddr=<object|any>]
[SyslogAddrPattern=<address pattern>]
[SyslogUserPattern=<user pattern>]
[SyslogMsgPattern=<login status pattern>]

Example

CONFIG AUTH AGENT